|
Dynojet Power Commander
Frequently Asked Questions: The modern EFI system on today's fuel injected motorcycles performs well (or at least somewhat acceptable on most bikes) and is and capable of delivering the proper fueling and performance under most conditions on a completely stock bike. However, the Alpha (N) /Speed Density systems EFI motorcycles utilize works off a principle of RPM x throttle position and input from various sensors. The bike's ECU programming works reasonably well when the bikes are completely stock (although the ECU programming is also very lean in certain areas for EPA reasons). When you change components such your exhaust this is a different story, as the bikes ECU is not capable of adapting to the these modifications. Although your EFI system may see the difference in intake air speed, the ECU's stock programming remains the same, delivering the same fuel at the same RPM etc. This usually leads to the EFI delivering an incorrect air/fuel ratio. Some common symptoms are surging, misfiring and loss of power. This is where the Power Commander will help! The Power Commander is a fuel injection adjustment module that plugs "inline" with the bikes' stock ECU and has the ability to add or remove fuel throughout the entire RPM range. This offers the ultimate in tuning and Air/Fuel ratio adjustment. The PC uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel (and ignition timing curves on Harley Davidson models) via the PC's onboard microprocessor. Using this technology the Power Commander offers a large area of adjustment without making any permanent changes to the bikes factory ECU. Changes are made by making adjustments to a "Map" that is loaded into the unit. Removing the PC returns the bike to its previous stock condition. The Power Commander is the best EFI tuning module available. We install and dyno tune bikes everyday and see HUGE gains with the Power Commander. We have installed and tuned most of the other various brands of EFI modules and because of the excellent performance gains, price, and ease of use we now sell the Dynojet Power Commander exclusively. Will Fuel Moto pre-program my Power Commander? Yes, Fuel Moto will pre-program the Power Commander based on the modifications you have done to your bike. We are not simply loading a map, we are programming the Power Commander with maps that have been developed for the intake and exhaust changes you have made to your bike using our experience and expertise from years of dyno tuning. We can download and set up the Accelerator pump feature which increases throttle response and off idle abruptness. We can also take into consideration your riding style or special concerns such as fuel mileage. On Harley Davidson Models we can also raise the rev limiter to 6200 RPM's with the Power Commanders Rev Xtend feature. We have the largest map database in the country and we develop maps daily on our Dynojet 250i dyno, feel free to contact us for details how the Power Commander will improve your specific bike. Furthermore, if you purchase a Power Commander from Fuel Moto we offer Map support and will supply you with any different maps you may need as you make future mods to your bike. If you have technical questions before or after the sale you can contact Jamie by phone toll free 1-877-729-4754 or email me at jamie@fuelmotousa.com and Iwe will be there to help Where do I get tech support for my Power Commander? Fuel Moto offers full technical Power Commander support for our customers toll free at 877-729-4754 Our tech line is available 9:00-5:00 Central time Monday thru Friday. You can also contact Dynojet at 800-882-4993 Where do I get maps for my Power Commander? Fuel Moto has the largest map
database in the USA and we continually test/tune for more and more combinations.
When you purchase the Power Commander from Fuel Moto you will have exclusive
access to our map database which can be accessed at
www.fuelmotousa.com/mapsupport
This is only available for our customers and is free of charge and you will be
prompted for your sales invoice number at that time. What's included with the Power Commander? The Power Commander is brand new in the original package. The unit comes complete with the detailed instructions, 9V adapter for powering up the unit off of the bike, USB cable link and Windows software that allows you to change between different maps or make adjustments to a map file. How long is the warranty? The standard Dynojet warranty is one year. Fuel Moto also doubles the warranty making the warranty period two full years. Note: Dynojet products sold
outside of the USA and Canada do not have a warranty. If you are
located outside of North America, warranty
applies only if purchased from an authorized seller within your
country. Fuel Moto encourages international buyers to purchase
Dynojet products from the official distributor in your country.
Download the Dynojet Power Commander
user manual here: Here are some helpful mini video's on some of the Power Commander USB's features and tools.
|
||||||||||||||||||||||||||||
