Series HG gear drive cams are made for ALL (’07 - up) Twin cam engines and ’06 DynaGlides. They have been designed to run with new 2007 S&S gear drives. The cam lobe designs listed below are the same as those manufactured for 1999-2006 engines. Gear drives made for ’99-2006 engines will not fit (2007 - up) Twin cam engines or 2006 Dyna engines. HG cam installation kits include two plates for blocking lubricating oil feed holes which were intended for stock chain drives, not 2007 style gear drives. Performance gains with the HG cams listed will be similar to ’99-’06 engines running with the same cam grinds.
Bolt-in cam 96 - 103 inches and stock compression ratio. Great for two up touring, this cam will add torque and HP at lower and middle RPM ranges (1800-5200 RPM).
| Open | Close | Lift | Duration | TDC Lift | |
| INT | 11 | 35 | .490 | 226 | .138 |
| EX | 41 | 09 | .490 | 230 | .120 |
For technical camshaft information along with detailed product support, please visit our Performance Cams page.
