Complete Cam Chest Kit Milwaukee-8 Engines Twin Cooled with Feuling Cam Plate/Pump

Fuel Moto - Complete Cam Chest upgrade kit for Harley Davidson Milwaukee-8 Oil Cooled engines with Feuling High Flow cam plate & Race Series oil pump

One stop all inclusive upgrade for the factory cam chest providing better oiling, durability, and excellent value. Note: does not include camshaft. 

Includes: 

• Feuling Race Series oil pump & High Flow cam plate for Twin Cooled Engines
• Fuel Moto EZ - quick install adjustable pushrod kit (works with stock pushrod tubes)
• Feuling Race Series lifters 
• Inner cam bearing
• Cometic gaskets & o-rings
• Works with all chain drive camshafts (not included)

More info:

Oil Pump/Cam Plate

• Feuling® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory camplate
• Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
• Oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
• Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
• Feuling oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
• Increase oil pressure, oil volume, engine oil flow and return oil scavenging
• Quieter and smoother engine operation

Pushrods:

• Fuel Moto EZ adjustable pushrods, works with the stock pushrod tubes

Tappets/Lifters:

• Full-travel hydraulic lifters made from machined steel designed with 0.200" of travel
• Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
• Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
• Increase engine rpm and valvetrain stability; decreases valve float for maximum valve lift

Gaskets:

• Cometic cam cover, lifter block gaskets, exhaust gaskets
• all necessary o-rings for pushrod tubes & oil pump